The environmental impacts of the digital economy are increasingly the focus of attention and concern. There is no question the demand for electricity, water and land have increased sharply in response to the growth in digital activity. Identifying, quantifying and mitigating environmental and ecological impacts are core to value creation, and investors must be mindful of how a company is positioned to create value while avoiding public rebuke for neglecting to account for the environmental impacts of greatly increased digital activity.

This article explores the digital economy, the growing set of metrics used to assess environmental sustainability in a digital economy, the tools companies are using to improve efficiency, lessen environmental impacts and increase supply chain transparency and traceability, and tips for investors in assessing a company’s environmental awareness of the impacts of greatly increased digital activity.

On 13 July 2021, Maine became the first state in the US to enact extended producer responsibility (EPR) legislation for packaging. Quickly thereafter, on 6 August, Oregon became the second state to enact a similar EPR law applicable to packaging. Other states are poised to enact similar legislation, following trends more mature in the European Union (EU) and elsewhere around the world.

The Biden Administration has embraced environmental justice with unprecedented gusto.  In its July 2020 Plan to Secure Environmental Justice and Equitable Economic Opportunity (Plan), the Biden Administration sets out in broad terms how it intends to use an “All-of-Government” approach to “rooting out systemic racism in our laws, policies, institutions, and hearts.”

New chemical innovation is not as celebrated as innovation in electronics, materials, software, or other sectors, but it is every bit as important. Many believe, as do we, that new chemical innovation is essential to achieving sustainable development. For this reason, a close look at the 2016 amendments to the Toxic Substances Control Act (TSCA) and the U.S. Environmental Protection Agency’s (EPA) implementation of them offers valuable insights into whether the new U.S. industrial chemical management law and EPA policy initiatives implementing it are aligned with this goal. This article discusses EPA’s implementation of the TSCA amendments as they relate to new chemical innovation and highlights EPA policy positions and institutional practices that EPA should reconsider to alignmore closely with the goal of more sustainable new chemical technologies.

Big retailers strive to source products responsibly. This typically includes recognition of chemicals in the products they market. As part of its commitment to responsible sourcing, Amazon recently posted its Chemicals Policy, which includes its first Restricted Substance List (RSL). This column discusses this milestone.

Climate change watchers know that October, 15, 2016, was a historic day for international climate action. On that day, nearly 200 countries reached an agreement to phase down use of hydrofluorocarbons (HFCs) at the 28th Meeting of the Parties to the Montreal Protocol in Kigali, Rwanda. The meeting to discuss the Amendment took place from July 15-23, 2016. This seemingly impossible alignment of international interests reflects years of effort. This column summarizes this historic event and its implications.

With little fanfare, on July 2, 2015, the White House Office of Science and Technology Policy (OSTP), the Office of Management and Budget (OMB), the U.S. Trade Representative, and the Council on Environmental Quality issued a memorandum directing the U.S. Environmental Protection Agency (EPA), the U.S. Food and Drug Administration (FDA), and the U.S. Department of Agriculture (USDA) to update the Coordinated Framework for the Regulation of Biotechnology. Last updated in 1992 and first rolled out in 1986, the Coordinated Framework outlines a comprehensive federal regulatory policy for products of biotechnology. The memorandum could have significant implications for innovators in the biotechnology and synthetic biology commercial space.

Imagine receiving a certified letter from the US Environmental Protection Agency (EPA) announcing that it plans to conduct an audit of your company’s facility in two weeks. The audit will focus on your company’s compliance obligations as a chemical manufacturer under the Toxic Substances Control Act (TSCA). Would you be prepared or are you unsure of what TSCA is and whether it applies to you? This article explains how TSCA applies to biobased chemicals and how nomenclature and chemical identity can impact commercialization.

In the second installment of this series, I wrote about how the Toxic Substances Control Act (TSCA) regulates products across a manufacturing process, from feedstock to product. In this last installment, I present options for updating TSCA and the related implementing regulations to put novel, biobased chemistry on an even footing with incumbent products and processes that were grandfathered in as part of the original TSCA Inventory. The key is to find a way to level the field without compromising the U. S. Environmental Protection Agency’s (EPA) mission and authority to protect human health and the environment.

In the first installment of this series, I wrote about how the Toxic Substances Control Act (TSCA) regulates products. In this article, we will look across a manufacturing process. TSCA applies to chemical substances that are used for purposes other than food, food additives, animal feed, cosmetics, drugs, tobacco and tobacco products, pesticides, munitions, and nuclear source materials. Biobased chemicals, that is, chemicals made from lignocellulose or other biomass, are finding markets in food and cosmetic markets, but much of the recent innovation focuses on biobased fuels and commodity chemicals. For these final products, TSCA applies. Chemical products must be listed on the TSCA Inventory of Chemical Substances (the Inventory) or be eligible for an exemption. If the product is not listed on the Inventory, the manufacturer must file a premanufacture notification 90 days before manufacturing (or importing) that substance or qualify for an appropriate exemption.

Bioeconomy companies recognize that their products are subject to a variety of federal chemical regulations, especially if they sell food, food additives, cosmetics, or other products regulated by the U.S. Food and Drug Administration (FDA). Unfortunately, companies may not recognize all the ways that the U.S. Environmental Protection Agency (EPA) regulates bioproducts, perhaps because of the understandable focus on the Clean Air Act (CAA) and the various programs under that authority: Renewable Fuel Standard, fuel additive registration, or other CAA submissions. TSCA also applies to bioproducts used in industrial, commercial, and most consumer products, including fuels. TSCA reporting requirements are in addition to, and separate from, CAA reporting.

Synthetic biology is delivering on its promise as an emerging scientific field in providing society with effective new sustainable products in diverse areas including renewable energy, contamination remediation, and medical applications, among others. As is the case with any rapidly evolving technology, the pace of technological innovation challenges regulators’ ability to identify and address adequately the substantial uncertainties they confront when discharging their legal obligations under controlling laws to ensure human and environmental safety. This article provides a brief description of synthetic biology, discusses the current domestic regulatory framework that governs the regulation of products of synthetic biology, and focuses narrowly on options and opportunities the US Environmental Protection Agency (EPA), innovators in the area of synthetic biology, and the Toxic Substances Control Act (TSCA)-regulated community at large may wish to consider to enhance TSCA’s core adaptive capacity to identify and address potential health and environmental risk implications posed by the commercialization of products of synthetic biology.

In last week’s Special Report on Scale-up in Industrial Biotechnology, the Digest noted that a consistent lesson shared by leading biotech heavyweights at the BIO World Congress scale-up session is to “avoid an afterthought approach to regulatory compliance.” As luck and good scheduling would have it, after lunch on the same day, savvy conference-goers got up-close-and-personal with two senior U.S. Environmental Protection Agency (EPA) regulators and a seasoned company executive involved with biobased chemicals at a session titled “Commercializing Renewable Chemicals and Biobased Products: The Importance of Successfully and Efficiently Navigating the Regulatory Process.” This article highlights the top tips for gaining EPA regulatory approval shared by EPA’s Dr. Tracy Williamson and Dr. David Widawsky at the session.

It is official. California’s Office of Administrative Law (OAL) approved the California Department of Toxic Substances Control (DTSC) Safer Consumer Products regulations, and the program went into effect on October 1, 2013. The regulations mark the much-anticipated regulatory implementation of California’s Green Chemistry Initiative. The regulations and final statement of reasons are available at http://www.dtsc.ca.gov/SCPRegulations.cfm. This new program is a true game-changer, and it will have profound national and international business, regulatory, and commercial implications for consumer product manufacturers and others for the reasons noted in this Washington Watch article. 

On January 29, 2014, the U.S. Environmental Protection Agency (EPA) released two final Alternatives Assessment Reports for the flame retardant decabromodiphenyl ether (DecaBDE) and bisphenol A (BPA) in thermal paper. The EPA’s Design for the Environment (DfE) program developed the assessments, which profile the environmental and human health hazards for DecaBDE, BPA, and their alternatives. This article explains why these assessments are important.

Biofuels have gotten all the press. But biobased chemicals have equal environmental and health potential, and also the most exposure under the Toxic Substances Control Act. Implications range from irritating to crippling, depending upon a manufacturer’s response.

The California Department of Toxic Substances Control (DTSC) Safer Consumer Products Regulations are now in effect (See "California Cracks Down on Chemicals"). While the most onerous requirements for "responsible entities" (manufacturers, importers, assemblers and retailers) will not hit for a while, companies should consider taking some initial steps now to understand how these regulations may affect operations in the future.

The application of the Toxic Substances Control Act (TSCA) to biobased chemicals is sometimes overlooked, given the enthusiasm supporting the commercialization of biobased products. This “Washington Watch” article explains TSCA’s application to these products and outlines strategies to ensure the successful marketing of biobased chemical products.

On August 23, 2013, the California Department of Toxic Substances Control (DTSC) released changes to the near final Safer Consumer Products Regulations (SCPR). These game-changing regulations took effect October 1, 2013. This column broadly outlines the rule and summarizes the changes.

While regulators are generally supportive of new chemistries that can replace older, petroleum-based ones, biobased chemicals are subject to the same Toxic Substances Control Act (TSCA) that governs every other chemical substance in the United States. Surprisingly, biobased chemicals that are considered to be “new chemicals” may actually receive more scrutiny under this law than established chemicals do. The following article provides practical information about the TSCA provisions that are most relevant to biobased chemicals, regulatory outcomes of Premanufacture Notification (PMN) review, and strategies stakeholders can use to assure compliance and successful commercialization of biobased chemicals.

Renewable chemicals are emerging at a fast pace, paving the way for new, innovative, and sustainable biobased products. The renewable chemicals’ market is estimated to reach $83.4 billion by 2018 in applications ranging from transportation and agriculture to textiles and cosmetics. In addition to all the elements great companies need to succeed -- a great product, a great brand, inspiring leadership, and vision -- biobased product companies need to understand how the U.S. Environmental Protection Agency (EPA) occupies a virtual seat at their management table, whether or not they know it.

On June 13, 2013, the Organization for Economic Cooperation and Development's (OECD) Working Party on Nanotechnology (WPN) published the final report Nanotechnology for Green Innovation. The report summarizes information collected from various projects undertaken by the WPN regarding the use of nanotechnology for green innovation.

On February 21, 2013, the U.S. Environmental Protection Agency (EPA) proposed a new approach to assure compliance with renewable fuel volume standards and minimize fraud. The proposal offers an alternative voluntary quality assurance program (QAP) to combat fraudulently procured Renewable Identification Numbers (RINs), which have been the source of problems in the past. Comments on the proposal are due April 18, 2013. This column explains the proposal and why a new option is needed.

The California Department of Toxic Substances Control (CDTSC) is one step closer to implementing the state’s Green Chemistry Initiative (GCI), which directs regulators to evaluate safer alternatives to chemicals that are believed to be toxic. These are not “garden variety” chemical regulations that impose a restriction here or there to prevent a perceived risk. Far from it. These regulations are game-changers. They ultimately will transform the way manufacturers select raw materials and make consumer products. As a result, these regulations are likely to influence significantly — and permanently — the way consumer products are conceived, formulated, and distributed. This “Washington Watch” column summarizes the core elements of the proposed Safer Consumer Products Regulations, highlighting significant changes from prior proposals.

In July, the California Department of Toxic Substances Control (DTSC) released proposed Safer Consumer Products regulations, the newest iteration of the much-anticipated regulatory implementation of the state’s Green Chemistry Initiative.