Blogs

On October 19, 2012, the European Comission (EC) began a public consultation on a preliminary opinion entitled Addressing the New Challenges for Risk Assessment. The Inter-Committee Coordination Group of the Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR), Scientific Committee on Consumer Safety (SCCS), and Scientific Committee on Health and Environmental Risks (SCHER) established a joint working group to review risk assessment procedures and new challenges for...

On October 22, 2012, Safe Work Australia announced the availability of a report entitled Human Health Hazard Assessment and Classification of Carbon Nanotubes, as well as an information sheet on the report. The report recommends that multi-walled carbon nanotubes should be classified as hazardous unless toxicological or other data for specific types imply otherwise. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) prepared the report in support of Safe Work...

On October 30, 2012, the European Chemicals Agency (ECHA) will hold a webinar entitled “How to ensure the safe use of nanomaterials under REACH Part I: Characterisation of nanoforms of substances in registration dossiers.” According to ECHA, the webinar will provide information to registrants on the type of information to be included in a Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) registration dossier for a substance with nanoform(s). In addition, on...

On October 5, 2012, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) for potassium titanium oxide, which was previously the subject of a consent order under Section 5(e) of the Toxic Substances Control Act (TSCA). EPA states that, based on test data on the premanufacture notice (PMN) substance and structure activity relationship analysis of test data on analogous respirable, poorly soluble particulates (subcategory titanium dioxide), EPA...

The Canada-U.S. Regulatory Cooperation Council (RCC) will hold a webinar on November 28, 2012, on its RCC Nanotechnology Work Plan. Canada and the U.S. created the RCC to align better their regulatory approaches in a number of areas, including nanotechnology. According to the U.S. Environmental Protection Agency (EPA), the purpose of the RCC’s nanotechnology initiative is to increase, where possible, regulatory transparency and coordination between the U.S. and...

During the Third International Conference on Chemicals Management (ICCM3), which was held September 17-21, 2012, participants agreed to add the measures concerning nanotechnologies and manufactured nanomaterials to the Strategic Approach to International Chemicals Management (SAICM) Global Plan of Action. The measures include “exploring the development of registers/inventories and/or market assessment activities of manufactured nanomaterials,” and “promoting the availability of...

On October 3, 2012, the European Commission (EC) announced its adoption of a Communication on the Second Regulatory Review on Nanomaterials, which assesses the adequacy and implementation of European Union (EU) legislation for nanomaterials, indicates follow-up actions, and responds to issues raised by the European Parliament (EP), EU Council, and the European Economic and Social Committee. The Communication concludes that “nanomaterials are similar to normal chemicals/substances in...

Tom Vilsack, Secretary of Agriculture, spoke at the 2012 GreenGov Symposium on September 25, 2012. According to Vilsack, the United States Department of Agriculture (USDA) is working to support the manufacturing industry by increasing the number of biobased products approved for federal purchase. Currently, there are approximately 9,300 BioPreferred products, and USDA intends to make 18,000 BioPreferred products available. Under Executive Order 13,514, federal agencies are required to ensure...

The European Commission’s (EC) Scientific Committee on Consumer Safety (SCCS) has posted an opinion on zinc oxide, nano-form. SCCS approved the opinion for adoption and it is now open for comment by applicants, national authorities, and other interested parties. SCCS considered whether zinc oxide in its nano-form is safe for use as a UV-filter with a concentration up to 25 percent in cosmetic products. SCCS concluded, on the basis of available evidence, that the use of zinc oxide...

The Centers for Disease Control and Prevention (CDC) published a September 20, 2012, Federal Register notice seeking comment on a proposed National Institute for Occupational Safety and Health (NIOSH) exposure assessment and epidemiological study of U.S. workers exposed to carbon nanotubes (CNT) and carbon nanofibers (CNF). The notice states that the proposed research is a cross-sectional study of the current U.S. workforce involved with CNT and CNF in manufacturing and distribution, to be...

Under a draft amendment to the Danish Chemicals Act, the Minister of the Environment would have the authority to write a detailed order establishing the rules for a national database of mixtures and articles containing or releasing nanomaterials. The order would also require producers and importers to report products containing or releasing nanomaterials. The information in the database is intended to form the basis of an evaluation of whether the content of nanomaterials in products on the...

In a September 13, 2012, Federal Register notice, the Office of Science and Technology Policy (OSTP) announced that the National Nanotechnology Coordination Office (NNCO) will hold a webinar on September 20, 2012, to provide an open forum to answer questions and hear suggestions related to the National Nanotechnology Initiative’s (NNI) public website, which was redesigned in April 2011. According to the notice, NNCO is seeking public comment and recommendations on...

On September 11, 2012, the Organization for Economic Cooperation and Development (OECD) posted a brochure entitled “Six Years of OECD Work on the Safety of Manufactured Nanomaterials: Achievements and Future Opportunities.” The brochure notes that “[a]fter six years of work, the OECD and its member countries have come to the conclusion that the approaches for the testing and assessment of traditional chemicals are in general appropriate for assessing the safety of nanomaterials,...

On September 5, 2012, the National Research Council (NRC) released a pre-publication version of a report entitled Science for Environmental Protection:  The Road Ahead. The U.S. Environmental Protection Agency (EPA) asked NRC to assess EPA’s overall capabilities “to develop, obtain, and use the best available scientific and technologic information and tools to meet persistent, emerging, and future mission challenges and opportunities.” The report discusses nanotechnology as an example...

The International Zinc Association (IZA) prepared a response to a recent article entitled “Soybean susceptibility to manufactured nanomaterials with evidence for food quality and soil fertility interruption” and posted on the Proceedings of the National Academy of Sciences (PNAS) website. IZA states that while the article and related reports highlight that nano-zinc oxide improves crop productivity and zinc concentration in plants, they suggest that the concentration...

On August 31, 2012, the European Commission’s (EC) Scientific Committee on Consumer Safety (SCCS) issued a call for experts on the safety assessment of nanomaterials in cosmetic products. Under Article 16 of the Cosmetic Regulation EC No 1223/2009, any cosmetic product containing nanomaterials must be notified to the EC six months prior to being placed on the market. In case of concern, the EC will request SCCS to provide an opinion. According to the EC website, to...

The International Organization for Standardization (ISO) Technical Committee (TC) 229 on nanotechnologies is preparing guidance on the format and content of voluntary labeling for manufactured nano-objects (MNO) and products, preparations, and mixtures containing MNOs. According to ISO, the guidance, ISO/TS 13830:2011, would also address the use of the term “nano” in product labeling. The European Committee for Standardization (CEN) was initially developing the guidance and,...

Lynn L. Bergeson will chair a session of the first Sustainable Nanotechnology Organization (SNO) conference, which will be held November 4-6, 2012, in Arlington, Virginia. The conference will address the critical aspects of sustainable nanotechnology, including lifecycle assessment, green synthesis, green energy, food and agriculture, nanomedicine, industrial nanotechnology, environmental and biological fate, and the overall sustainability of engineered...

The Proceedings of the National Academy of Sciences (PNAS) posted on its website on August 20, 2012, an article entitled “Soybean susceptibility to manufactured nanomaterials with evidence for food quality and soil fertility interruption.” According to the authors, no single study to date has examined the full implications of growing plants to full maturity in field soil contaminated by manufactured nanomaterials. The PNAS study does so for soybeans in farm soil amended...

The French Ministry of Ecology and Sustainable Development published an order in the August 10, 2012, Journal Officiel de la République Française concerning the content and submission requirements for the annual declarations of information relating to nanoparticle substances, as substances or as part of a mixture. The order comes into force on January 1, 2013, and provides details on how companies should meet the mandatory declaration obligations....