All Knowledge & Insights By Date

On October 22, 2012, Safe Work Australia announced the availability of a report entitled Human Health Hazard Assessment and Classification of Carbon Nanotubes, as well as an information sheet on the report. The report recommends that multi-walled carbon nanotubes should be classified as hazardous unless toxicological or other data for specific types imply otherwise. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) prepared the report in support of Safe Work...

The Centers for Disease Control and Prevention (CDC) published a September 20, 2012, Federal Register notice seeking comment on a proposed National Institute for Occupational Safety and Health (NIOSH) exposure assessment and epidemiological study of U.S. workers exposed to carbon nanotubes (CNT) and carbon nanofibers (CNF). The notice states that the proposed research is a cross-sectional study of the current U.S. workforce involved with CNT and CNF in manufacturing and distribution, to be...

On September 5, 2012, the National Research Council (NRC) released a pre-publication version of a report entitled Science for Environmental Protection:  The Road Ahead. The U.S. Environmental Protection Agency (EPA) asked NRC to assess EPA’s overall capabilities “to develop, obtain, and use the best available scientific and technologic information and tools to meet persistent, emerging, and future mission challenges and opportunities.” The report discusses nanotechnology as an example...

The International Zinc Association (IZA) prepared a response to a recent article entitled “Soybean susceptibility to manufactured nanomaterials with evidence for food quality and soil fertility interruption” and posted on the Proceedings of the National Academy of Sciences (PNAS) website. IZA states that while the article and related reports highlight that nano-zinc oxide improves crop productivity and zinc concentration in plants, they suggest that the concentration...

The July 3, 2012, edition of the National Institute for Occupational Safety and Health (NIOSH) eNews includes a nanotechnology update, which states that the critical question to address is whether nanomaterials pose health or safety risks to workers employed in their manufacture and industrial use. The update includes the following “notable recent findings and areas of research”: A peer-reviewed paper recently published by NIOSH researchers addressing five areas to help...

The Netherlands National Institute for Public Health and the Environment (RIVM) published on June 29, 2012, a report entitled Interpretation and implications of the European Commission Recommendation on the definition of nanomaterial. The Dutch ministries requested RIVM to interpret the meaning and implications of the European Commission’s (EC) recommendation from a scientific perspective and to consider the implications for use in legislation. RIVM intends the report to provide the basis...

The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....

The International Organization for Standardization (ISO) has published a Technical Report (TR) providing guidance on the physicochemical characterization of manufactured nano-objects prior to toxicological assessment.  ISO states that TR 13014:2012, Nanotechnologies — Guidance on physicochemical characterization of engineered nanoscale materials for toxicologic assessment, “is intended to assist health scientists and experts to understand, plan, identify, and address relevant...

The National Institute for Occupational Safety and Health (NIOSH) has posted a document entitled General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories, which contains recommendations on engineering controls and safe practices for handling engineered nanomaterials in laboratories and some pilot scale operations. According to NIOSH, it designed the guidance “to be used in tandem with well-established practices and the laboratory’s chemical hygiene...

On March 27-28, 2012, the Organization for Economic Cooperation and Development (OECD), in collaboration with the National Nanotechnology Initiative (NNI), and hosted by the American Association for the Advancement of Science (AAAS) held an International Symposium on Assessing the Economic Impact of Nanotechnology. The objective of the symposium was to explore systematically the need for and development of a methodology to assess the economic impact of nanotechnology across whole economies,...

On May 14, 2012, the agencies participating in the National Nanotechnology Initiative (NNI) announced the fourth Nanotechnology Signature Initiative, “Nanotechnology Knowledge Infrastructure:  Enabling National Leadership in Sustainable Design” (NKI). According to a press release issued by the National Nanotechnology Coordination Office (NNCO), this signature initiative will stimulate the development of models, simulation tools, and databases to enable the prediction of specific...

On April 27, 2012, the President’s Council of Advisors on Science and Technology (PCAST) released the Report to the President and Congress on the Fourth Assessment of the National Nanotechnology Initiative, which is a Congressionally mandated biennial review of the National Nanotechnology Initiative (NNI). PCAST found that the NNI, which has provided $16 billion to date in investments by 26 federal agencies, “has had a ‘catalytic and substantial impact’ on the growth of the...

On April 18, 2012, the United States Department of Defense (DoD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA) promulgated a final rule amending the Federal Acquisition Regulation (FAR) to implement changes due to the Farm Security and Rural Investment Act that require contractors to report the biobased products purchased under service and construction contracts.  According to the Federal Register notice, the reporting will enable agencies to...

On March 27-28, 2012, the Organization for Economic Cooperation and Development (OECD), in collaboration with the National Nanotechnology Initiative (NNI), and hosted by the American Association for the Advancement of Science (AAAS) held an International Symposium on Assessing the Economic Impact of Nanotechnology. The objective of the symposium was to explore systematically the need for and development of a methodology to assess the economic impact of nanotechnology across whole economies,...

On March 20, 2012, the National Nanotechnology Coordination Office (NNCO) announced the appointment of Dr. Robert Pohanka as the Director of the NNCO. The NNCO provides technical and administrative support to the Nanoscale Science, Engineering, and Technology (NSET) Subcommittee, serves as a central point of contact for federal nanotechnology research and development activities, and provides public outreach on behalf of the National Nanotechnology Initiative (NNI). Dr. Pohanka previously...

The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....

On February 9, 2012, the U.S. Environmental Protection Agency (EPA) posted a summary report on its January 2011 workshop on nanoscale silver. The workshop was the second in a series conducted by the National Center for Environmental Assessment (NCEA) to further the development of a research strategy for completing comprehensive environmental assessments of nanomaterials.  The basis of the workshop was the report Nanomaterial Case Study:  Nanoscale Silver...

On January 25, 2012, the National Research Council (NRC) posted the pre-publication version of its report entitled A Research Strategy for Environmental, Health, and Safety Aspects of Engineered Nanomaterials. The U.S. Environmental Protection Agency (EPA) asked NRC to perform an independent study to develop and monitor the implementation of an integrated research strategy to address the environmental, health, and safety (EHS) aspects of engineered nanomaterials (ENM). NRC...

On December 20, 2011, the National Institute of Standards and Technology (NIST) announced it issued the world’s first reference material for single-wall carbon nanotube soot.  According to NIST, “nanotube-laden soot is the primary industrial source of single-wall carbon nanotubes, perhaps the archetype of all nanoscale materials.” NIST states that the new material “offers companies and researchers a badly needed source of uniform and well-characterized carbon nanotube soot...

On December 7, 2011, the National Institute for Occupational Safety and Health (NIOSH) posted an item on its Science Blog entitled “Respiratory Protection for Workers Handling Engineered Nanoparticles.” The purpose of the blog item is to provide an update on the science and rationale behind NIOSH’s recommendations for the use and selection of respirators against engineered nanoparticles. The article summarizes respirator performance research and respirator...