By Lynn L. Bergeson Under Canada’s New Substances Fees Regulations, fees must be provided with each New Substance Notification (NSN) package submitted under the New Substance Notification Regulations (Chemicals and Polymers). The amount of the fee is dependent on the annual sales in Canada for the notifier, the specific Schedule being submitted, and other services being requested (e.g., confidential search on the Domestic Substances List (DSL) or Non-Domestic Substances List (NDSL) or...
Archives
April 23, 2020
EPA Remarks That Requirements to Notify EPA of Certain Changes to Disinfectants During COVID-19 May Be Retained
On April 22, 2020, Assistant Administrator Alexandra Dapolito Dunn stated, on prerecorded remarks posted by the American Bar Association, that the U.S. Environmental Protection Agency (EPA), after the coronavirus crisis subsides, will review whether some of the current requirements to submit notifications or label amendments are necessary. Some of these requirements have been suspended as part of EPA’s efforts to hasten the process for disinfectants approved for use against SARS-CoV-2,...
On May 9, 2019, the U.S. Environmental Protection Agency (EPA) announced that it would soon be making available a signed action signed on May 6, 2019, that identifies chemical substances for inactive designation according to the Toxic Substances Control Act (TSCA) Inventory Notification (Active-Inactive) Requirements rule. The pre-publication version of the notice is available here. Specifically, EPA states that the signed action is a companion to the first version of the TSCA...
On April 24, 2018, the U.S. Environmental Protection Agency (EPA) announced that it would be presenting a webinar to assist processors with reporting under the Toxic Substances Control Act (TSCA) Inventory Notification (Active-Inactive) Rule, published in the Federal Register on August 11, 2017. This webinar, scheduled for May 23, 2018, from 1:00 p.m. to 4:00 p.m. (EDT) will “include an overview of reporting requirements for processors, a demonstration of the electronic...
On February 7, 2018, manufacturers that manufactured (including imported) chemicals for nonexempt commercial purposes during the ten-year time period ending on June 21, 2016, will be required to report to the U.S. Environmental Protection Agency (EPA) for the retrospective reporting period that began on August 11, 2017, per the Toxic Substances Control Act (TSCA) Inventory Notification (Active/Inactive) Requirements final rule that established a retrospective electronic notification of...
January 19, 2018
EPA Offers Assistance to Manufacturers Reporting for the TSCA Inventory February 7, 2018, Deadline
On January 18, 2018, the U.S. Environmental Protection Agency (EPA) posted additional documents on its website, specifically materials from two webinars, designed to assist manufacturers reporting for the Toxic Substances Control Act (TSCA) Inventory Notification (Active-Inactive) Requirements final rule that became effective on August 11, 2017. The rule, which established a retrospective electronic notification of chemical substances on the TSCA Inventory that were manufactured...
November 22, 2017
EPA Releases List of Chemical Substances Reported under TSCA Inventory Notification (Active-Inactive) Rule
On November 22, 2017, the U.S. Environmental Protection Agency (EPA) announced it was releasing a preliminary list of chemical substances reported under the Toxic Substances Control Act (TSCA) Inventory Notification (Active-Inactive) rule that includes substances reported to EPA through November 10, 2017, and that it will be updated approximately once per month. EPA states that it is making this list available to help keep the stakeholder community informed of the status of reporting...
August 11, 2017
EPA Publishes TSCA Framework Final Rule on TSCA Inventory Notification (Active-Inactive) Requirements; Sets Dates for Retrospective Reporting
On August 11, 2017, the U.S. Environmental Protection Agency (EPA) published the third Toxic Substances Control Act (TSCA) framework final rule in the Federal Register, the TSCA Inventory Notification (Active-Inactive) Requirements. This final rule is effective as of August 11, 2017 (the date of publication). As further detailed in the final rulemaking, chemical manufacturers and importers are required to submit notifications for chemicals that were manufactured or imported over...
August 10, 2017
THE WAIT IS OVER: TSCA Framework Final Rule on TSCA Inventory Notification (Active-Inactive) Requirements Scheduled For Publication
On August 11, 2017, the U.S. Environmental Protection Agency (EPA) is scheduled to publish the third Toxic Substances Control Act (TSCA) framework final rule in the Federal Register, the TSCA Inventory Notification (Active-Inactive) Requirements. This final rule is scheduled to become effective on August 11, 2017 (the date of publication). This rule, signed by EPA on June 22, 2017, establishes, among other requirements: More information on this final rule is...
March 16, 2017
EPA’s Extension of Comment Date for TSCA Inventory Notification Proposed Rule Issued in Error
On March 15, 2017, the U.S. Environmental Protection Agency (EPA) announced it would be extending the comment period on the Toxic Substances Control Act (TSCA) Inventory Notification (Active-Inactive) proposed rule issued on January 13, 2017. On March 16, 2017, however, EPA rescinded this extension, stating it was issued in error, but did state that it would “make every effort to consider comments received outside of the formal comment period, if provided by March 24, 2017.” EPA is...
The U.S. Environmental Protection Agency (EPA) is scheduled to publish a proposed rule on January 13, 2017, that would require a retrospective electronic notification of chemical substances on the Toxic Substances Control Act (TSCA) Inventory that were manufactured (including imported) for non-exempt commercial purposes during the ten-year time period ending on June 21, 2016. EPA would also accept such notices for chemical substances that were processed. The recent TSCA amendments require...
October 24, 2012
Safe Work Australia Recommends Classification of Carbon Nanotubes as Hazardous Chemicals
On October 22, 2012, Safe Work Australia announced the availability of a report entitled Human Health Hazard Assessment and Classification of Carbon Nanotubes, as well as an information sheet on the report. The report recommends that multi-walled carbon nanotubes should be classified as hazardous unless toxicological or other data for specific types imply otherwise. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) prepared the report in support of Safe Work...
September 30, 2011
Australia Publishes Literature Review Relating to Six Nanomaterials
Australia’s National Industrial Chemicals Notification and Assessment Scheme (NICNAS) announced on September 28, 2011, the availability of a review of the 2007-2009 literature on toxicological and health effects relating to six nanomaterials. NICNAS commissioned the review and analysis of literature concerning fullerenes, carbon nanotubes, and nanoforms of zinc oxide, titanium dioxide, cerium oxide, and silver. According to NICNAS, it chose these nanomaterials because it...
December 28, 2010
Australia Issues Guidance on New Chemical Requirements for Notification of Industrial Nanomaterials
Australia’s National Industrial Notification and Assessment Scheme (NICNAS) recently issued guidance on the new chemical requirements for the notification and assessment of industrial nanomaterials that are considered to be new chemicals. The new administrative arrangements will be effective from January 1, 2011, and will apply to any new chemical that falls under the following working definition of “industrial nanomaterial”: . . . industrial materials...
October 21, 2010
Australia Announces Adjustments To NICNAS New Chemicals Processes For Industrial Nanomaterials
In an October 5, 2010, Chemical Gazette notice, the National Industrial Chemicals Notification and Assessment Scheme (NICNAS) announced that it is introducing new administrative processes for the notification and assessment of industrial nanomaterials that are considered to be new chemicals. The new administrative arrangements will be effective from January 1, 2011, and will apply to any new chemical that falls under the following working definition of “industrial...
On November 9, 2009, Australia announced the availability of a public discussion paper proposing to strengthen regulation of industrial nanomaterials used in Australia. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) developed the proposal in conjunction with its Nanotechnology Advisory Group, which includes representatives from industry, the community, and research sectors. Major regulatory reforms would include: refinement of pre-market assessment categories...
April 15, 2009
Australian Unions Call for Regulation of Nanomaterials
On April 14, 2009, the Australian Council of Trade Unions (ACTU) issued a press release entitled “Nanotech Poses Possible Health and Safety Risk to Workers and Needs Regulation.” According to ACTU, “[t]he rapidly growing nanotechnology market in Australia requires urgent regulation to protect the health and safety of workers and consumers.” ACTU notes that, currently, there is no mandatory register in Australia of who is importing, manufacturing, supplying, or selling...
October 16, 2008
EPA Issues Consent Order for Multiwalled Carbon Nanotubes
The Environmental Defense Fund (EDF) recently posted two blog items regarding a consent order negotiated by the U.S. Environmental Protection Agency (EPA). The October 9, 2008, item states that EPA intends to issue a sanitized version of a consent order negotiated with a producer of multiwalled carbon nanotubes (MWCNT). According to EDF, the order was prompted by EPA’s review of a premanufacturing notification (PMN). EDF obtained a redacted copy of the consent order, and...