Archives

January 6, 2015

UK Health and Safety Laboratory Will Hold Course on Nanotechnology Health and Safety

On January 27, 2015, the United Kingdom (UK) Health and Safety Laboratory (HSL) will hold a one-day course on “Nanotechnology Health & Safety — A Practical Approach.”  The course is intended to help participants gain an understanding of the techniques and methods available to identify and control exposure to airborne nanomaterials.  HSL states that the course will include: The course is aimed at health and safety advisors, occupational hygienists, and users of...
October 28, 2014

EPA Promulgates SNUR for Functionalized Carbon Nanotubes (Generic)

On October 27, 2014, the U.S. Environmental Protection Agency (EPA) promulgated significant new use rules (SNUR) for 52 chemical substances, including “functionalized carbon nanotubes (generic).” According to the Federal Register notice, the premanufacture notice (PMN) states that the substance will be used as a thin film for electronic device applications. The notice states that, as described in the PMN, EPA “does not expect significant occupational exposures due to the use of...
September 25, 2014

Dr. Chuck Geraci Appointed NIOSH Associate Director for Nanotechnology

Earlier this week, Dr. John Howard, Director of the National Institute for Occupational Safety and Health (NIOSH) announced that, effective October 6, 2014, Chuck Geraci, Ph.D., CIH, has been appointed NIOSH Associate Director for Nanotechnology. NIOSH states: “As Associate Director for Nanotechnology, Dr. Geraci will ensure that NIOSH maintains its outstanding national and international reputation for scientific achievement in the emerging area of nanotechnology implications for workers....
September 3, 2014

EPA Promulgates Final SNURs, Including Several for Nanomaterials

On September 2, 2014, the U.S. Environmental Protection Agency (EPA) promulgated final significant new use rules (SNUR) under Section 5(a)(2) of the Toxic Substances Control Act (TSCA) for 36 chemical substances that were the subject of premanufacture notices (PMN). The substances include multi-walled carbon nanotube (generic) (P-08-0392), multi-wall carbon nanotubes (generic) (P-09-257), multi-walled carbon nanofibers (generic) (PMNs P-10-115, P-10-116, P-10-117, P-10-118, P-10-119,...
February 12, 2014

EPA Promulgates Final SNURs for Multi-Walled Carbon Nanotubes and Infused Carbon Nanostructures

On February 12, 2014, the U.S. Environmental Protection Agency (EPA) issued, through a direct final rule, significant new use rules (SNUR) under the Toxic Substances Control Act (TSCA) for 35 chemical substances that were the subject of premanufacture notices (PMN). The 35 substances include four identified as multi-walled carbon nanotubes (generic) that were the subject of a December 3, 2012, TSCA Section 5(e) consent order. The consent order requires the use of personal protective equipment...
January 10, 2014

Journal of Nanoparticle Research Publishes Article Describing Occupational Safety and Health Criteria for Responsible Development of Nanotechnology

On December 7, 2013, the Journal of Nanoparticle Research published online an article entitled “Occupational safety and health criteria for responsible development of nanotechnology.” The authors, who are affiliated with the National Institute for Occupational Safety and Health (NIOSH), describe five criterion actions that they believe should be practiced by decision-makers to ensure the responsible development of nanotechnology: “(1) anticipate, identify, and track potentially...
November 25, 2013

Finnish Institute of Occupational Health Releases Report on MWCNTs

The Finnish Institute of Occupational Health released a report in October 2013 entitled Evaluation of the health effects of carbon nanotubes. According to the Institute, recent studies have suggested that some types of multiwalled carbon nanotubes (MWCNT) have similar effects as asbestos.  The Institute states that the report “shows that rigid, long and needle-like MWCNTs induce inflammation and DNA damage in the lungs and in cultured cells, while flexible, long and tangled MWCNTs do not....
November 15, 2013

Japan Announces Voluntary Guidance on Measuring Airborne Carbon Nanotubes in Workplaces

Japan’s National Institute of Advanced Industrial Science and Technology (AIST) announced in October 2013 a voluntary guidance document on measuring airborne carbon nanotubes (CNT) in workplaces. The Technology Research Association for Single Wall CNTs (TASC), a consortium of nine companies and AIST, prepared the guidance, which is intended to provide a means of CNT safety management.  The guidance summarizes the available practical methods for measuring airborne CNTs:  (1) on-line...
November 11, 2013

NIOSH Issues New Recommendations to Control Worker Exposure to Engineered Nanomaterials

On November 8, 2013, the National Institute for Occupational Safety and Health (NIOSH) published a report entitled Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes, which identifies and describes strategies for the engineering control of worker exposure during the production or use of engineered nanomaterials. NIOSH notes that there are currently more than 1,000 nanomaterial-containing consumer products available, including “makeup,...
October 24, 2013

Particle and Fibre Toxicology Publishes Article Concerning Workplace Exposure to CNTs

On October 21, 2013, Particle and Fibre Toxicology posted an article entitled “Carbon nanotube dosimetry: from workplace exposure assessment to inhalation toxicology.”  The authors, who are affiliated with the National Institute for Occupational Safety and Health (NIOSH), note that there are currently no known end-point effects in humans following carbon nanotube (CNT) exposure, leading to extrapolation from rodent studies. The purpose of the study was to determine...
October 2, 2013

A&WMA Forms Intercommittee Task Force on Nanoscale Science and Engineering

The Air & Waste Management Association (A&WMA) recently announced the formation of an Intercommittee Task Force (ITF) on Nanoscale Science and Engineering. The ITF will span a wide array of subjects, including environmental policy, measurement, health effects, monitoring, management, and safety issues associated with the development and use of nanomaterials, nanotechnologies, and nanoscale products. Its objectives will likely be: Full participation in the ITF is typically...
September 12, 2013

NRC Releases Report on Advancing Research Agenda for EHS Aspects of Nanomaterials

On September 12, 2013, the National Research Council (NRC) released a report entitled Research Progress on Environmental, Health, and Safety Aspects of Engineered Nanomaterials. The U.S. Environmental Protection Agency (EPA) asked the NRC to perform an independent study to develop and monitor the implementation of an integrated research strategy to address the environmental, health, and safety (EHS) aspects of engineered nanomaterials (ENM). The Committee to Develop a Research...
May 8, 2013

IRSST and NanoQuébec Will Fund Research on Worker Exposure to Engineered Nanoparticles

On April 15, 2013, the Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST) and NanoQuébec announced they will jointly fund three new research projects on worker exposure to engineered nanoparticles. The principal researchers for these projects, their affiliations, and the titles of the projects selected are: According to IRSST, the projects will likely take two years to complete and will involve collaborators from various institutions, as well as...
April 26, 2013

USA Today Runs Article on New NIOSH Nanotech Safety Guidelines

An April 26, 2013, USA Today article entitled “CDC sets carbon nanotech safety guidelines” reports on the National Institute of Occupational Safety and Health (NIOSH) Current Intelligence Bulletin (CIB) 65, Occupational Exposure to Carbon Nanotubes and Nanofibers.  The article includes comments from Andrew Maynard, Chair of Environmental Health Sciences at the University of Michigan,  Todd Kuiken with the Project on Emerging Nanotechnologies at the Woodrow Wilson Center for...
April 25, 2013

NIOSH CIB on Carbon Nanotubes and Nanofibers Includes Lower REL

On April 24, 2013, the National Institute for Occupational Safety and Health (NIOSH) released Current Intelligence Bulletin 65: Occupational Exposure to Carbon Nanotubes and Nanofibers, which includes a proposed recommended exposure limit (REL) that is significantly lower than that in the 2010 draft. NIOSH issues Current Intelligence Bulletins (CIB) to disseminate new scientific information about occupational hazards. CIB 65 reviews animal and other toxicological data...
March 26, 2013

UK Posts Guidance on Controlling Occupational Exposure to Manufactured Nanomaterials

The United Kingdom’s (UK) Health and Safety Executive (HSE) has posted a guidance document describing how to control occupational exposure to manufactured nanomaterials in the workplace. HSE intends the guidance to assist in compliance with the Control of Substances Hazardous to Health Regulations 2002 (COSHH) (as amended). HSE states that the guidance is specifically about the manufacture and manipulation of all manufactured nanomaterials, carbon nanotubes (CNT), and other bio-persistent...
March 21, 2013

Australia Releases Research Reports on Nanotechnology Work Health and Safety Issues

On March 18, 2013, Safe Work Australia (SWA) released two research reports examining nanotechnology work health and safety issues, Investigating the Emissions of Nanomaterials from Composites and Other Solid Articles During Machining Process and Evaluation of Potential Safety (Physicochemical) Hazards Associated with the Use of Engineered Nanomaterials. SWA noted the perceived safety risks of nanomaterials and that Australia is taking a precautionary approach towards nanomaterials under the...
March 13, 2013

nanoMICEX Publishes First Newsletter

On March 11, 2013, the European Union’s (EU) FP7 project on Mitigation of Risk and Control of Exposure in Nanotechnology-based Inks and Pigments (nanoMICEX) announced publication of its first newsletter. According to nanoMICEX, project participants have been working to improve the conditions for workers in the inks and pigments industry, and the newsletter describes the latest news and developments. The newsletter reports on the March 2012 kick-off meeting, where participants discussed...
March 12, 2013

NIOSH Announces New Findings on Lung Tumor Formation in Laboratory Mice Exposed to Multi-Walled Carbon Nanotubes

On March 11, 2013, at the annual meeting of the Society of Toxicology, researchers from the National Institute for Occupational Safety and Health (NIOSH) reported preliminary findings from a new laboratory study in which mice were exposed by inhalation to multi-walled carbon nanotubes (MWCNT). According to NIOSH, the study was designed to investigate whether these tiny particles have potential to initiate or promote cancer. One group of laboratory mice was injected with a...
February 5, 2013

OSHA Publishes Fact Sheet on Working Safely with Nanomaterials

The Occupational Safety and Health Administration (OSHA) recently published a fact sheet entitled Working Safely with Nanomaterials. OSHA notes that workers who use nanotechnology in research or production processes may be exposed to nanomaterials through inhalation, skin contact, or ingestion. OSHA intends the fact sheet to provide “basic information to workers and employers on the most current understanding of potential hazards associated with this rapidly-developing...
January 22, 2013

NIOSH Seeks Comment for Updating Its 2013-2016 Nanotechnology Strategic Plan

On January 18, 2013, the National Institute for Occupational Safety and Health (NIOSH) published a Federal Register notice seeking comment on the types of hazard identification and risk management research to consider in updating its fiscal years 2013-2016 nanotechnology strategic plan. NIOSH states that it wants to “build on the accomplishments of ongoing research” to “develop strategic research goals and objectives for nanotechnology occupational safety and health research...
December 18, 2012

NIOSH to Publish Information and Comment Request for Silver Nanoparticles

The National Institute for Occupational Safety and Health (NIOSH) is scheduled to publish in the December 19, 2012, Federal Register a request for information and comment on silver nanoparticles. According to the notice, NIOSH has initiated an evaluation of the scientific data on silver nanoparticles “to ascertain the potential health risks to workers and to identify gaps in knowledge so that appropriate laboratory and field research studies can be...
November 8, 2012

NIOSH Publishes Progress Report from Nanotechnology Research Center

On November 7, 2012, the National Institute for Occupational Safety and Health (NIOSH) Nanotechnology Research Center (NTRC) posted a document entitled Filling the Knowledge Gaps for Safe Nanotechnology in the Workplace: A Progress Report from the NIOSH Nanotechnology Research Center, 2004–2011. NIOSH established NTRC in 2004 to address occupational safety and health concerns associated with nanotechnology. The progress report summarizes program accomplishments from the inception of NTRC...
October 24, 2012

Safe Work Australia Recommends Classification of Carbon Nanotubes as Hazardous Chemicals

On October 22, 2012, Safe Work Australia announced the availability of a report entitled Human Health Hazard Assessment and Classification of Carbon Nanotubes, as well as an information sheet on the report. The report recommends that multi-walled carbon nanotubes should be classified as hazardous unless toxicological or other data for specific types imply otherwise. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) prepared the report in support of Safe Work...
October 11, 2012

Potassium Titanium Oxide SNUR Bans Manufacture of Particle Size Less Than 100 nm

On October 5, 2012, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) for potassium titanium oxide, which was previously the subject of a consent order under Section 5(e) of the Toxic Substances Control Act (TSCA). EPA states that, based on test data on the premanufacture notice (PMN) substance and structure activity relationship analysis of test data on analogous respirable, poorly soluble particulates (subcategory titanium dioxide), EPA...
September 21, 2012

CDC Seeks Comment on Proposed NIOSH Exposure Assessment and Epidemiological Study of U.S. Workers

The Centers for Disease Control and Prevention (CDC) published a September 20, 2012, Federal Register notice seeking comment on a proposed National Institute for Occupational Safety and Health (NIOSH) exposure assessment and epidemiological study of U.S. workers exposed to carbon nanotubes (CNT) and carbon nanofibers (CNF). The notice states that the proposed research is a cross-sectional study of the current U.S. workforce involved with CNT and CNF in manufacturing and distribution, to be...
August 15, 2012

EU-OSHA Posts Literature Review on Risk Perception and Communication on Nanomaterials in the Workplace

On June 20, 2012, European Agency for Safety and Health at Work (EU-OSHA) posted a new literature review entitled Risk perception and risk communication with regard to nanomaterials in the workplace, which found “serious gaps in our awareness of the potential risks involved in handling nanomaterials at work, and serious shortcomings in the way that those risks are communicated to workplaces.” The review intends to: EU-OSHA states that risk communication strategies need to help...
July 12, 2012

NIOSH eNews Includes Nanotechnology Update

The July 3, 2012, edition of the National Institute for Occupational Safety and Health (NIOSH) eNews includes a nanotechnology update, which states that the critical question to address is whether nanomaterials pose health or safety risks to workers employed in their manufacture and industrial use. The update includes the following “notable recent findings and areas of research”:...
June 28, 2012

Registration Open for Workshop on Safe Nano Design

The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....
May 30, 2012

NIOSH Releases Guidance on General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories

The National Institute for Occupational Safety and Health (NIOSH) has posted a document entitled General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories, which contains recommendations on engineering controls and safe practices for handling engineered nanomaterials in laboratories and some pilot scale operations. According to NIOSH, it designed the guidance “to be used in tandem with well-established practices and the laboratory’s chemical hygiene...
May 18, 2012

Federal Advisory Council on Occupational Safety and Health Considers Dispersible Engineered Nanomaterials

The Federal Advisory Council on Occupational Safety and Health (FACOSH) met on May 3, 2012, during which it discussed the use of occupational exposure levels (OEL) by the federal government. Because the Occupational Safety and Health Administration’s (OSHA) permissible exposure limits (PEL) have remained unchanged since their adoption on May 29, 1971, and do not account for advances in technology or the latest data, FACOSH asked its Emerging Issues Subcommittee to analyze federal...
April 17, 2012

EU OSHA Announces French Report on Feasibility of Epidemiological Surveillance System for Workers Exposed to Engineered Nanomaterials

The European Agency for Safety and Health at Work (EU OSHA) posted an item on April 16, 2012, concerning a French report on the feasibility of an epidemiological surveillance system for workers exposed to engineered nanomaterials. EU OSHA notes that the French Health and Occupational Ministries asked the French Institute for Public Health Surveillance (InVS), supported by a multidisciplinary working group convened by the Institute for Public Health Research, to assess the feasibility of an...
April 5, 2012

B&C and Acta Will Hold an OSHA GHS Webinar

Bergeson & Campbell, P.C. (B&C) and The Acta Group, L.L.C. (Acta) will hold a complimentary webinar on April 18, 2012, from 1:30 to 3:30 p.m. (EDT) on the Occupational Safety and Health Administration’s (OSHA) final rule revising the OSHA Hazard Communication Standard (HCS) issued on March 26, 2012. The final rule aligns the HCS with the United Nations’ Globally Harmonized System for Chemical Classification and Labeling (GHS). OSHA estimates the rule is expected to...
April 4, 2012

EPA Promulgates SNUR for Infused Carbon Nanostructures

On April 4, 2012, the U.S. Environmental Protection Agency (EPA) promulgated, through a direct final rule, significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). This includes a SNUR for “infused carbon nanostructures (generic).” According to EPA, the PMN states that the generic (non-confidential) use of the substance is as an additive to provide conductive properties to reinforcements used in composites. EPA states that, based...
March 12, 2012

Australia Announces New Guidance on the Safe Handling and Use of Carbon Nanotubes

On March 5, 2012, Safe Work Australia announced the release of an information sheet on the safe handling and use of carbon nanotubes in the workplace and a document entitled Safe Handling and Use of Carbon Nanotubes. The information sheet provides an overview of risk management for carbon nanotubes, while Safe Handling and Use of Carbon Nanotubes describes two approaches to managing the risks: risk management with detailed hazard analysis and exposure assessment, and risk management by...
March 1, 2012

NIOSH Sponsoring Workshop on Safe Nano Design

The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....
January 30, 2012

EPA Extends Comment Period for Proposed SNURs

The U.S. Environmental Protection Agency (EPA) has announced that, in response to public comments, it will provide the public more time to comment on the December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.” EPA states “the comment period is being...
January 25, 2012

NRC Publishes A Research Strategy for Environmental, Health, and Safety Aspects of Engineered Nanomaterials

On January 25, 2012, the National Research Council (NRC) posted the pre-publication version of its report entitled A Research Strategy for Environmental, Health, and Safety Aspects of Engineered Nanomaterials. The U.S. Environmental Protection Agency (EPA) asked NRC to perform an independent study to develop and monitor the implementation of an integrated research strategy to address the environmental, health, and safety (EHS) aspects of engineered nanomaterials (ENM). NRC...
December 28, 2011

EPA Publishes Proposed SNURs for CNTs

The U.S. Environmental Protection Agency (EPA) published on December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.”  EPA states that because of a lack of established nomenclature for CNTs, the Toxic Substances Control Act (TSCA) Inventory names for CNTs are...
December 19, 2011

EP Passes Resolution Calling for Legislation to Protect Workers from Nanomaterials

The European Parliament (EP) passed a resolution on December 15, 2011, stating that nanomaterials must be covered by current European Union (EU) health and safety rules, based on a mid-term review of the EU’s 2007-2012 health and safety at work strategy. The resolution, which was adopted with 371 votes in favor, 47 against, and 15 abstentions, also calls for the assessment of the effects of new technologies on health. The EP calls for legislation to ensure that nanomaterials...
December 7, 2011

NIOSH Science Blog Posts Entry Regarding Respiratory Protection for Workers Handling Engineered Nanoparticles

On December 7, 2011, the National Institute for Occupational Safety and Health (NIOSH) posted an item on its Science Blog entitled “Respiratory Protection for Workers Handling Engineered Nanoparticles.” The purpose of the blog item is to provide an update on the science and rationale behind NIOSH’s recommendations for the use and selection of respirators against engineered nanoparticles. The article summarizes respirator performance research and respirator...
November 30, 2011

ObservatoryNANO Posts Report on Nanotechnology EHS Landscape

ObservatoryNANO posted on November 24, 2011, a report on the nanotechnology environment, health, and safety (EHS) landscape. ObservatoryNANO, which is funded by the European Commission, intends to support European policy makers by providing scientific and economic analysis of nanoscience and nanotechnology developments. ObservatoryNANO notes that activity concerned with the EHS aspects of nanotechnologies has been growing for a decade.  ObservatoryNANO states that the aim of...
November 10, 2011

ICON Announces Availability of Presentation Slides from Training Course

On November 8, 2011, the International Council on Nanotechnology (ICON) announced the availability of the presentation slides from the modules for the training course entitled “Introduction to Nanomaterials and Occupational Health.”  The course was developed under a grant from the Occupational Safety and Health Administration (OSHA), and is intended to prepare safety professionals to address issues that may arise in the nanomaterial workplace by providing a comprehensive review of...
July 20, 2011

NNI Releases Reports from EHS Workshops

On July 19, 2011, the National Nanotechnology Initiative (NNI) announced the release of four reports from a series of workshops focusing on issues in the nanotechnology environmental, health, and safety (EHS) arena. According to NNI, the workshops were a part of an ongoing strategy to coordinate nanotechnology-related EHS research by convening experts from industry, academia, and the federal government to share the latest information and newest developments, to discuss the current...
June 1, 2011

OECD Provides Snapshot on Current and Planned Activities on the Safety of Manufactured Nanomaterials

On May 26, 2011, the Organization for Economic Cooperation and Development (OECD) posted a document entitled “Current Developments/Activities on the Safety of Manufactured Nanomaterials,” which provides information on the outcomes and developments of the OECD Working Party on Manufactured Nanomaterials (WPMN) related to the safety of manufactured nanomaterials. OECD states that the document “provides a snapshot of information on current/planned activities related to the safety of...
May 19, 2011

ISO Publishes Standard for Nanomaterial Risk Evaluation

The International Organization for Standardization (ISO) has published a new standard, ISO/TR 13121:2011, which describes a process for identifying, evaluating, addressing, making decisions about, and communicating the potential risks of developing and using manufactured nanomaterials to protect the health and safety of the public, consumers, workers, and the environment.  According to ISO, the standard offers guidance on the information needed to make sound risk evaluations and risk...
March 29, 2011

NRC Includes Nanomaterials in Guidelines for Working with Hazardous Chemicals

On March 25, 2011, the National Research Council (NRC) announced the availability of a report entitled Prudent Practices in the Laboratory, which updates NRC’s guidelines on the safe use of hazardous chemicals. NRC last updated the guidelines in 1995, and the new edition includes new topics, including the handling of nanomaterials. The update sets out general guidelines for the management of nanomaterials. NRC developed the guidelines “from accepted chemical hygiene protocols for...
March 24, 2011

University of Cincinnati NIOSH ERC Will Hold Nanotechnology Conference

The National Institute for Occupational Safety and Health (NIOSH) announced that the University of Cincinnati NIOSH Education and Research Center (ERC) will sponsor a May 10, 2011, conference at the Department of Environmental Health, University of Cincinnati College of Medicine, on “Nanotechnology — Health and Safety Considerations.” Registration is free. Speakers include:...
March 10, 2011

NIOSH Requests Information to Update Its Nanotechnology Strategic Plan

On March 7, 2011, the National Institute for Occupational Safety and Health (NIOSH) announced that it seeks comment on the types of hazard identification and risk management research that it should consider in updating the NIOSH 2009 nanotechnology strategic plan. According to the Federal Register notice, NIOSH would like to build on the accomplishments of ongoing research to develop strategic research goals and objectives through 2015. Comments are due April 15,...
March 8, 2011

ASME Nanotechnology Institute Posts New Podcast in Nano Educational Series

On March 1, 2011, the American Society of Mechanical Engineers (ASME) Nanotechnology Institute posted the most recent podcast in its Nano Educational Series. The podcast concerns nano environmental health and safety, with Dr. Andrew Maynard, University of Michigan Risk Science Center. The next podcast, scheduled to be posted on March 15, 2011, will discuss modeling and simulation with Professor Wing Kam Liu, Northwestern University. According to the Institute, it intends to improve user’s...