On January 18, 2013, the National Institute for Occupational Safety and Health (NIOSH) published a Federal Register notice seeking comment on the types of hazard identification and risk management research to consider in updating its fiscal years 2013-2016 nanotechnology strategic plan. NIOSH states that it wants to “build on the accomplishments of ongoing research” to “develop strategic research goals and objectives for nanotechnology occupational safety and health research...
Archives
The National Institute for Occupational Safety and Health (NIOSH) is scheduled to publish in the December 19, 2012, Federal Register a request for information and comment on silver nanoparticles. According to the notice, NIOSH has initiated an evaluation of the scientific data on silver nanoparticles “to ascertain the potential health risks to workers and to identify gaps in knowledge so that appropriate laboratory and field research studies can be...
November 8, 2012
NIOSH Publishes Progress Report from Nanotechnology Research Center
On November 7, 2012, the National Institute for Occupational Safety and Health (NIOSH) Nanotechnology Research Center (NTRC) posted a document entitled Filling the Knowledge Gaps for Safe Nanotechnology in the Workplace: A Progress Report from the NIOSH Nanotechnology Research Center, 2004–2011. NIOSH established NTRC in 2004 to address occupational safety and health concerns associated with nanotechnology. The progress report summarizes program accomplishments from the inception of NTRC...
October 24, 2012
Safe Work Australia Recommends Classification of Carbon Nanotubes as Hazardous Chemicals
On October 22, 2012, Safe Work Australia announced the availability of a report entitled Human Health Hazard Assessment and Classification of Carbon Nanotubes, as well as an information sheet on the report. The report recommends that multi-walled carbon nanotubes should be classified as hazardous unless toxicological or other data for specific types imply otherwise. The National Industrial Chemicals Notification and Assessment Scheme (NICNAS) prepared the report in support of Safe Work...
On October 5, 2012, the U.S. Environmental Protection Agency (EPA) promulgated a final significant new use rule (SNUR) for potassium titanium oxide, which was previously the subject of a consent order under Section 5(e) of the Toxic Substances Control Act (TSCA). EPA states that, based on test data on the premanufacture notice (PMN) substance and structure activity relationship analysis of test data on analogous respirable, poorly soluble particulates (subcategory titanium dioxide), EPA...
September 21, 2012
CDC Seeks Comment on Proposed NIOSH Exposure Assessment and Epidemiological Study of U.S. Workers
The Centers for Disease Control and Prevention (CDC) published a September 20, 2012, Federal Register notice seeking comment on a proposed National Institute for Occupational Safety and Health (NIOSH) exposure assessment and epidemiological study of U.S. workers exposed to carbon nanotubes (CNT) and carbon nanofibers (CNF). The notice states that the proposed research is a cross-sectional study of the current U.S. workforce involved with CNT and CNF in manufacturing and distribution, to be...
August 15, 2012
EU-OSHA Posts Literature Review on Risk Perception and Communication on Nanomaterials in the Workplace
On June 20, 2012, European Agency for Safety and Health at Work (EU-OSHA) posted a new literature review entitled Risk perception and risk communication with regard to nanomaterials in the workplace, which found “serious gaps in our awareness of the potential risks involved in handling nanomaterials at work, and serious shortcomings in the way that those risks are communicated to workplaces.” The review intends to: EU-OSHA states that risk communication strategies need to help...
July 12, 2012
NIOSH eNews Includes Nanotechnology Update
The July 3, 2012, edition of the National Institute for Occupational Safety and Health (NIOSH) eNews includes a nanotechnology update, which states that the critical question to address is whether nanomaterials pose health or safety risks to workers employed in their manufacture and industrial use. The update includes the following “notable recent findings and areas of research”:...
June 28, 2012
Registration Open for Workshop on Safe Nano Design
The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....
May 30, 2012
NIOSH Releases Guidance on General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories
The National Institute for Occupational Safety and Health (NIOSH) has posted a document entitled General Safe Practices for Working with Engineered Nanomaterials in Research Laboratories, which contains recommendations on engineering controls and safe practices for handling engineered nanomaterials in laboratories and some pilot scale operations. According to NIOSH, it designed the guidance “to be used in tandem with well-established practices and the laboratory’s chemical hygiene...
May 18, 2012
Federal Advisory Council on Occupational Safety and Health Considers Dispersible Engineered Nanomaterials
The Federal Advisory Council on Occupational Safety and Health (FACOSH) met on May 3, 2012, during which it discussed the use of occupational exposure levels (OEL) by the federal government. Because the Occupational Safety and Health Administration’s (OSHA) permissible exposure limits (PEL) have remained unchanged since their adoption on May 29, 1971, and do not account for advances in technology or the latest data, FACOSH asked its Emerging Issues Subcommittee to analyze federal...
April 17, 2012
EU OSHA Announces French Report on Feasibility of Epidemiological Surveillance System for Workers Exposed to Engineered Nanomaterials
The European Agency for Safety and Health at Work (EU OSHA) posted an item on April 16, 2012, concerning a French report on the feasibility of an epidemiological surveillance system for workers exposed to engineered nanomaterials. EU OSHA notes that the French Health and Occupational Ministries asked the French Institute for Public Health Surveillance (InVS), supported by a multidisciplinary working group convened by the Institute for Public Health Research, to assess the feasibility of an...
April 5, 2012
B&C and Acta Will Hold an OSHA GHS Webinar
Bergeson & Campbell, P.C. (B&C) and The Acta Group, L.L.C. (Acta) will hold a complimentary webinar on April 18, 2012, from 1:30 to 3:30 p.m. (EDT) on the Occupational Safety and Health Administration’s (OSHA) final rule revising the OSHA Hazard Communication Standard (HCS) issued on March 26, 2012. The final rule aligns the HCS with the United Nations’ Globally Harmonized System for Chemical Classification and Labeling (GHS). OSHA estimates the rule is expected to...
April 4, 2012
EPA Promulgates SNUR for Infused Carbon Nanostructures
On April 4, 2012, the U.S. Environmental Protection Agency (EPA) promulgated, through a direct final rule, significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). This includes a SNUR for “infused carbon nanostructures (generic).” According to EPA, the PMN states that the generic (non-confidential) use of the substance is as an additive to provide conductive properties to reinforcements used in composites. EPA states that, based...
On March 5, 2012, Safe Work Australia announced the release of an information sheet on the safe handling and use of carbon nanotubes in the workplace and a document entitled Safe Handling and Use of Carbon Nanotubes. The information sheet provides an overview of risk management for carbon nanotubes, while Safe Handling and Use of Carbon Nanotubes describes two approaches to managing the risks: risk management with detailed hazard analysis and exposure assessment, and risk management by...
March 1, 2012
NIOSH Sponsoring Workshop on Safe Nano Design
The National Institute for Occupational Safety and Health (NIOSH) Prevention through Design Program and Nanotechnology Research Center will hold an August 14-16, 2012, workshop entitled “Safe Nano Design: Molecule » Manufacturing » Market.” NIOSH states that participants will provide input into the safe commercialization of nano products resulting in the development of guidelines for the safe synthesis of nanoparticles and associated products, using a Prevention-through-Design approach....
January 30, 2012
EPA Extends Comment Period for Proposed SNURs
The U.S. Environmental Protection Agency (EPA) has announced that, in response to public comments, it will provide the public more time to comment on the December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.” EPA states “the comment period is being...
January 25, 2012
NRC Publishes A Research Strategy for Environmental, Health, and Safety Aspects of Engineered Nanomaterials
On January 25, 2012, the National Research Council (NRC) posted the pre-publication version of its report entitled A Research Strategy for Environmental, Health, and Safety Aspects of Engineered Nanomaterials. The U.S. Environmental Protection Agency (EPA) asked NRC to perform an independent study to develop and monitor the implementation of an integrated research strategy to address the environmental, health, and safety (EHS) aspects of engineered nanomaterials (ENM). NRC...
December 28, 2011
EPA Publishes Proposed SNURs for CNTs
The U.S. Environmental Protection Agency (EPA) published on December 28, 2011, proposed significant new use rules (SNUR) for 17 chemical substances that were the subject of premanufacture notices (PMN). Of particular interest, seven of the PMN substances’ reported chemical names include the term “carbon nanotube” (CNT) or “CNT.” EPA states that because of a lack of established nomenclature for CNTs, the Toxic Substances Control Act (TSCA) Inventory names for CNTs are...
December 19, 2011
EP Passes Resolution Calling for Legislation to Protect Workers from Nanomaterials
The European Parliament (EP) passed a resolution on December 15, 2011, stating that nanomaterials must be covered by current European Union (EU) health and safety rules, based on a mid-term review of the EU’s 2007-2012 health and safety at work strategy. The resolution, which was adopted with 371 votes in favor, 47 against, and 15 abstentions, also calls for the assessment of the effects of new technologies on health. The EP calls for legislation to ensure that nanomaterials...